| Maintenance
Maintenance of today’s wood floors is easy! New technology in
stains and finishes call for regular cleaning that takes little more than
sweeping and/or vacuuming, with occasional use of a professional wood floor
cleaning product. You will want to use a cleaning product recommended by your
flooring manufacturer, installer, or other wood flooring professional. This will
ensure that you use the proper cleaner for your type of flooring and finish.
Regular Maintenance
With today’s advances in wood flooring stains and finishes, cleaning
your wood floors has never been easier. Regular maintenance requires little more
than sweeping with a soft bristle broom, and vacuuming with a soft floor
attachment if your wood floor includes a beveled edge that could collect debris.
You also should clean your floors periodically with a professional wood floor
cleaning product recommended by a wood flooring professional.
Preventive Maintenance
There are other steps you can take to minimize maintenance and maintain the
beauty of your wood floors as well.
- Do not use sheet vinyl or tile floor care products on wood floors.
Self-polishing acrylic waxes cause wood to become slippery and appear dull
quickly.
- Use throw rugs both inside and outside doorways to help prevent grit, dirt
and other debris from being tracked onto your wood floors. This will prevent
scratching.
- Do not wet-mop a wood floor. Standing water can dull the finish, damage the
wood and leave a discoloring residue.
- Wipe up spills immediately with a slightly dampened towel.
- Do not over-wax a wood floor. If the floor dulls, try buffing instead. Avoid
wax buildup under furniture and other light traffic areas by applying wax in
these spots every other waxing session.
- Put soft plastic or fabric-faced glides under the legs of furniture to
prevent scuffing and scratching.
- Avoid walking on your wood floors with cleats, sports shoes and high heels. A
125-pound woman walking in high heels has an impact of 2,000 pounds per square
inch. An exposed heel nail can exert up to 8,000 pounds per square inch. This
kind of impact can dent any floor surface.
- When moving heavy furniture, do not slide it on wood flooring. It is best to
pick up the furniture completely to protect the wood flooring.
- For wood flooring in the kitchen, place an area rug in front of the kitchen
sink.
- Use a humidifier throughout the winter months to keep wood movement and
shrinkage to a minimum.
Renewal & Repairs - Surface Finished Floors
Unlike most other floor covering options, wood is very forgiving. Most problems
can be prevented with proper maintenance, but when problems do occur, renewal
and repair usually is possible. For renewing and repairing stains and scratches
on any wood floor, always begin at the outer edge of the stain or scratch and
work toward the middle.
If the stain or scratch has penetrated the finish only and is not in the wood,
you are dealing with a surface finished floor.
Stains
Chewing Gum, Crayon, Candle Wax
Apply a plastic bag filled with ice on top of the stain until it is brittle
enough to crumble off. Clean the area with a product made for urethane finishes.
Cigarette Burns
Most common burns can be treated with a touch-up kit made for urethane finishes.
Rub with sandpaper, stain and refinish. For burns that reach deep into the wood,
individual plank or parquet boards may need to be replaced.
Food, Water, Dark Spots, Dog Spots
Use a cleaner developed specifically for urethane finishes to remove the spot or
stain. More stubborn spots may require additional scrubbing with the cleaner and
a wood flooring scrub pad made for urethane floors.
Oil, Grease Stains
Rub the area with a cleaner developed for urethane.
Scratches
Repair with a touch-up kit made for urethane finishes available from any wood
flooring retailer.
|